Beograd · 43°49′NBeograd— Editorial —‹No. 250Ponedeljak / 16·11·202616·11·26
MODUS
Car Culture · Blog

Gas in the car: which engine can handle it and which one eats it up

Sequential LPG pays off on the engine that tolerates it. On the wrong engine, the savings of two years are eaten by one head.

Open engine compartment of the car in the workshop
↳ Photo: Michael Lock / Unsplash

Gas savings are measured at the pump, and the bill comes from the engine head. A car that uses 9.5 liters of LPG instead of 8 liters of gasoline saves about 40 percent at each filling, until the valve seats start to sink and the compression on one cylinder drops from 12 to 7 bars. That's why everything starts with the engine, not with the service offering the lowest price.

Today, gas is installed as a sequential system (reducer, nozzles per cylinder, own computer and tank in the place of the spare wheel) in an authorized service center, after which the car passes the test and attestation, and LPG is entered in the traffic license.For a four-cylinder engine with indirect injection, calculate roughly600 to 900 euroswith a certificate, and twice as much for a direct injection engine, around 1,200 to 1,800 euros. These are indicative market ranges, not a price list; ask for a quote that lists the manufacturer of the equipment, not just the total amount.

What is actually being installed

The sequential system injects gas into the intake manifold, next to the fuel nozzle of each cylinder, at the right time for that cylinder. The gas computer reads the signals of the gasoline computer and recalculates them, so the engine computer does not even know that it is working on gas.Reducer evaporatorheats liquid gas with engine coolant and turns it into steam; that's why the car always starts on gasoline and switches to gas only when the engine warms up to 30 to 40 degrees.

Names that self-respecting services offer are ItalianBRC, Landy Renzo andLove itand DutchPrince, which also has a direct injection engine system. Ask in particular which nozzles are and which computer, as this saves on cheap installations: the kit with nameless nozzles is significantly cheaper, and the difference comes back through twitching and readjustments.Toroidal tankgoes into the recess of the spare wheel, nominally 40 to 70 liters, and fills up to 80 percent of the volume. The tank has a shelf life, usually 10 years from production, and the year is stamped on the plate; with a used gas tank, this is the first thing to look at.

For a four-cylinder engine with indirect injection, calculate roughly 600 to 900 euros with a certificate, and twice as much for a direct injection engine, around 1,200 to 1,800 euros.

Engines that don't like gas

Motor typeThe problemWhat to do.
Direct injection (TSI, TFSI, GDI, EcoBoost)gasoline nozzles in the cylinder are overheated without flowspecial system, part of the fuel is still gasoline, more expensive installation
Soft valve seats (service technicians most often list Toyota VVT-i engines 1.4 and 1.6 and part of Honda engines from the 2000s)gas burns hotter and drier, seats sinkvalve lubrication system or give up
Mechanical gap adjustment (plates)clearance decreases faster than on gasolinegap control at 30,000 to 40,000 km
Hydraulic lifters, indirect injectionleast problemsideal candidate

The best candidates are old, simple gasoline engines with hydraulic lifters: the VW 1.6 eight-valve from the Golf 4 and Octavia, or Opel's 1.6 Ecotec from the Astra G. Turbo gasoline engines with direct injection can run on gas, but that's where the calculation falls quickly. With diesel, there is no gas in the classical sense; We wrote about which diesels are worth buying in the guide forthe best diesel engines for the second-hand.

Papers and maintenance

After installation, the service issues documentation with homologation marks of the parts (regulations UNECE R67 for components and R115 for retrofitting), the car goes for testing in an authorized organization, and then for registration in the traffic department. The gas installation is then checked periodically: according to the 2009 rules, it was every five years, with the replacement of the tank after ten; as the regulations have changed since then, the technical inspection station has the final say on the deadline, and ask them before it expires. The gas phase filter is changed at 10,000 to 15,000 kilometers, and the oil in the gas engine should not wait until the upper limit of the interval; which oil and which norm, see in the text aboutoil markings.

Calculation for the end: at 20,000 kilometers per year, with 8 liters of gasoline per 100 and LPG at approximately half the price of gasoline, the gas returns the installation in about a year. At 8,000 kilometers a year, savings are about 400 euros, so repayment takes two to three years and only makes sense if you keep the car.

Questions & answers

short and to the point
How to install gas in a car?
A sequential system with a gearbox, nozzles, a computer and a toroidal tank is installed in the authorized service, after which the car passes the test and LPG is entered in the traffic permit.
Which engines do not tolerate gas?
Most problems are caused by direct injection engines and engines with soft valve seats. Plate motors require more frequent clearance control, at 30,000 to 40,000 km.
How much more does a car spend on gas?
About 15 to 20 percent more liters than gasoline, for example 9.5 instead of 8 liters per 100 km, but at approximately half the price.

Read on

from the same press