Coffee filter at home: the grinder decides, the rest is the measurement
The same bag of grain gives sour water on Tuesday and bitter water on Wednesday. The culprit is not coffee, but three numbers that no one measures.
Same bag, same funnel, same man. On Tuesday a cup that stings with acid and ends up in the sink, on Wednesday something heavy and bitter. It's not the coffee's fault, and neither is the equipment. Three figures that are never measured in the kitchen are to blame:relationshipcoffee and water,temperaturewater andtotal timeflow. Grinding coarseness is the fourth thing, but it is not a number but a button that brings the three in order.
The V60 is a funnel with one big hole in the bottom, which means the flow isn't controlled by the plastic but by you. Espresso is made by pressure and takes 25 seconds, and here everything is the opposite — gravity and three minutes. How it differs at the level of extraction, we explained in the text aboutespresso without bitterness.
Three figures and the mill that adjusts them
It's a relationship1:16—15 g of coffee per 240 ml of water, or 20 g per 320 ml if you are making for two. Measure on a scale, not with a spoon: the same spoon holds 9 or 13 grams depending on how airy the bean is after roasting.
The water is on92 to 94 °C. If you don't have a thermometer, take the pot off the heat and wait45 seconds. Boiling water extracts the bitter phenols, and below 88 °C the extraction remains incomplete and the cup is sour.
It's grindingmedium coarse, in terms of coarseness between table salt and fine sand. This is the one item that doesn't skimp on:a grinder, not a knife. A knife mill cuts the grain into random pieces, so the fine dust is over-extracted and bitter while the large pieces go unused — in the same cup, at the same time. This is why the same coffee on Tuesday and Wednesday is not the same coffee.
Three minutes, one step at a time
Firstrinse the paper filterhot water and spill it. This removes the taste of the cardboard and heats the funnel and container; cold ceramic alone lowers the water temperature by several degrees.
The V60 is a funnel with one big hole in the bottom, which means the flow isn't controlled by the plastic but by you.
Thenbloom: pourtwice as much water as coffee, so 30 g for 15 g of coffee, and let it go30 to 45 seconds. Freshly roasted beans release carbon dioxide that physically pushes the water out of the ground coffee, and if you skip this step, the extraction is uneven. If it foams abundantly, the grain is fresh; if it does not foam at all, it is old and that is the answer to all further questions.
Continue to pourin a circle, from the center outwards, in two or three rounds, and never directly on the paper against the edge — the water sliding down the wall passes the coffee and dilutes the cup. The total time, measured from the first pour to the last drop and including bloom, should be2:30 to 3:00for 15 grams.
That number is your tuning instrument. Past forless than 2:15means too coarsely ground and sour cup — grind finer. Does it last?longer than 3:30, it is too fine and bitterness is guaranteed — grind more coarsely. Change one thing at a time between the two cups, otherwise you don't know what helped.
Water and grain, two silent spoilers
Completely soft water gives a flat coffee without a middle, because the minerals participate in binding the aromas. Too hard coats and suffocates the acid. An ordinary pitcher with a filter solves Belgrade water for this purpose better than any more expensive equipment.
Buy beans with a roast date, not an expiration date, and use them in betweenon the seventh and twenty-first dayfrom frying. Before the seventh day there is too much gas and the foam breaks off, after three weeks it loses its top. Where in Belgrade such grain is found, we listed in the text of Frfive roasters whose grain goes into the backpack, and why the same variety from the same village can be two different coffees depends on processing — we separated that in the text aboutwashed, natural and honey treatment.
Questions & answers
short and to the point- What is the ratio of coffee to water for filter coffee?
- The ratio is 1:16, so 15 grams of coffee per 240 ml of water. Measure on a scale, because the same spoon carries between 9 and 13 grams depending on the frying.
- At what temperature is the V60 made?
- At 92 to 94 °C. Without a thermometer, wait 45 seconds after removing the cooker from the heat. Boiling water extracts the bitterness, below 88 °C the coffee remains sour.
- Why is my filter coffee bitter?
- Most often, it is ground very fine, so the water passes for more than three and a half minutes. Move the grinder to the coarser side and measure the time from the first drop to the last drop.