Beograd · 43°49′NBeograd— Editorial —‹No. 250Ponedeljak / 16·11·202616·11·26
MODUS
Gastronomy · Editorial

Chocolate from bean to bar: what happens in the factory

The crack when it breaks, the shine when it turns to the light - both qualities are decided weeks before the board hits the shelf.

Cubes of dark chocolate with the relief of a cocoa leaf, with grains in the background
↳ Photo: Elena Leya / Unsplash

Break open a bar of good dark chocolate and you hear a clear, dry snap - not the soft snap of a cheap, vegetable-fat-filled version. That sound is no accident. It is the last evidence of a process that began months earlier, on a plantation ten degrees north and south of the equator, with a cacao pod weighing about a pound and full of sticky, white-purple pulp around the bean.

Bean-to-bar means exactly what it says: the producer controls the entire path from bean to bar, instead of buying already processed cocoa powder and butter from large mills. Each step along the way - fermentation, drying, roasting, milling, conching, tempering - changes the taste as much as the grape variety changes the wine.

Grain first: fermentation and drying

Fresh cacao beans are bitter and without a single note of chocolate - the flavor is created only by fermentation. The grains with the pulp are placed in wooden crates or on banana leaves and covered, where the temperature rises to 45 to 50 degrees for five to seven days. Yeasts first convert the sugar from the pulp into alcohol, then the bacteria convert the alcohol into acetic acid - this heat and acidity kill the germ of the grain and trigger chemical reactions that build the precursors of the chocolate flavor, compounds that turn the roasting into a recognizable smell.

Trinitario and forastero beans usually require a full seven days of fermentation due to their thicker walls; sensitive criollo, rarer and more expensive, often passes in three to five days because the longer fermentation erases its subtle floral notes. After that, the grain goes to dry in the sun for seven to ten days, until the humidity drops from about 60 to below seven to eight percent—low ​​enough that mold doesn't catch on the long journey to the factory, but slow enough that the aroma doesn't burn on the hot concrete.

Frying, grinding and conching - that's where the flavor comes from

Roasting takes fifteen to forty minutes at a temperature between one hundred twenty and one hundred fifty degrees, depending on the origin of the beans and the style the producer is looking for: lower and shorter for the fruity, sour profile of South American beans, higher and longer for the deep, nutty profile of West African ones. After roasting, the shell cracks and separates from the core (nib), which is ground into a paste called cocoa mass - liquid at room temperature thanks to cocoa butter, which makes up almost half the weight of the bean.

Conching is the most often skipped step by amateurs, and it costs the most time: a machine with rollers or balls mixes and aerates the paste for twenty-four to seventy-two hours, sometimes longer for premium boards. The process reduces the particle size of the sugar and cocoa particles to below twenty micrometers - less than what the tongue can feel as grainy - and at the same time evaporates the remaining acetic and other volatile acids that would leave the chocolate astringent. Boards that sting in the throat are almost always underconched.

A stepDurationTemperature
Fermentation3-7 days45-50°C
Drying7-10 dayssun, ambience
Frying15-40 min120-150°C
Conching24-72 h45-70°C
Tempering10-20 min31-32°C (dark)

Tempering: the crystal that decides the shine and the puc

Cocoa butter crystallizes in six different forms, designated by Roman numerals one through six, and only the fifth form (Crystal V) produces chocolate that shines, cracks cleanly, and melts at human body temperature instead of room temperature. Tempering is a precise game of heating and cooling: the molten mass is first heated to about 45 degrees to wipe out all the crystals, then cooled to 27-28 degrees to form the V crystal germs, then gently heated again to 31-32 degrees (for dark; milky and white require a degree or two lower) to melt only the unstable forms, and the stable V remains.

When that step fails, the cocoa butter crystallizes randomly into soft, gray shapes (fat bloom) - the chocolate is still edible, it just looks like it's been in a pocket in the sun. It is interesting that we see a similar logic of crystallization inhoney that can be sugared: and there it is the shape of the crystal, not the quality, that decides whether the texture is smooth or grainy.

Bean-to-bar means exactly what it says: the producer controls the entire path from bean to bar, instead of buying already processed cocoa powder and butter from large mills.

Milk and white chocolate - same process, different ingredients

White chocolate contains no cocoa solids at all—it's a mixture of cocoa butter, milk powder, and sugar, which is why it lacks the bitterness and dark flavor that comes from the very parts of the beans that white chocolate omits. The legal minimum in most countries is 20% cocoa butter for a product to even be called white chocolate; below that, the manufacturer must declare it as a candy based on cocoa butter, not as chocolate.

Milk chocolate adds milk powder (typically 12-20% milk solids) to the standard recipe, but bean-to-bar producers often go a step further—drying their own milk on the farm or using caramelized milk powder that adds a note similar to dulce de leche. Conching milk chocolate takes less time than dark chocolate, because the presence of milk fat already softens the texture, so mixing for too long can dissolve too much of the milk's aroma and leave only sweetness.

Three checks before buying: label, sound, melting

Etiquette is the first test. A serious manufacturer lists the origin of the bean (state, often region or farm), the percentage of cacao parts, and the date of roasting or conching - the industrial board rarely goes beyond the cocoa mass without a number. Another test is the sound: break the board close to the ear, a clean crack means good tempering, a dull sound means the mass has passed through the cooler too quickly.

The third test is melting on the tongue without grains - if small lumps remain after ten seconds, the conching was short. Small manufactories that make batches of a few hundred boards per month often have better control of these steps than mass producers, because the entire process is monitored by one or two people from a bag of beans to packaging - look for them at fair stands specialized in cocoa and coffee, where tasting is done for the same reason as for wine: the origin can be felt in the glass, or here, in the square.

The origin of the grain changes the flavor profile as much as the region changes the wine - grains from Madagascar carry a pronounced, almost fruity acidity similar to red berries, while grains from Venezuela or Ecuador (a particularly prized national strain) give softer, nutty and floral notes without that sharp acidity. Producers who work with a single origin per panel, rather than blending grains from multiple countries for a uniform, predictable taste, allow the customer to taste the difference directly - just like with a wine from a single plot versus a blended wine from multiple regions.

Price is the last but not insignificant indicator - fair trade directly with farmers, instead of through stock brokers, usually means that the producer paid two to three times the price for the bean than he would have paid on the cocoa exchange, and this difference must be felt in the price of the board. A hundred-gram tablet under the price of coffee from a coffee shop has rarely gone through all the steps described here at full intensity; somewhere along the way someone cut fermentation, drying or conching hours to stay on budget, and it feels like a flat, one-dimensional sweetness without the layers of aroma that good chocolate carries from the plantation itself.

Questions & answers

short and to the point
Why is bean-to-bar chocolate different from regular chocolate?
Because the same producer controls the fermentation, roasting and conching - each step changes the taste, while industrial chocolate buys already standardized cocoa mass without that effect.
How long does conching chocolate take?
From 24 to 72 hours, sometimes longer for premium boards - this step reduces particles to below 20 micrometers and removes bitter volatile acids.
Why does chocolate have to be tempered?
In order for the cocoa butter to crystallize into a stable V shape, which gives a shine, a clean snap when broken, and melts at body temperature instead of room temperature.

Read on

from the same press